Hot Sale for China Custom RoHS SMD Mlcc Electrolytic Ceramic Capacitor Hot Products
Our company since its inception, constantly regards product or service high quality as business life, continually improve creation technology, make improvements to product high-quality and consistently strengthen business total high-quality management, in strict accordance together with the national standard ISO 9001:2000 for Hot Sale for China Custom RoHS SMD Mlcc Electrolytic Ceramic Capacitor Hot Products, Winning customers’ trust is definitely the gold key to our good results! If you are fascinated in our products, make sure you sense absolutely free to go to our web site or make contact with us.
Our company since its inception, constantly regards product or service high quality as business life, continually improve creation technology, make improvements to product high-quality and consistently strengthen business total high-quality management, in strict accordance together with the national standard ISO 9001:2000 for China Ceramic Capacitor Hot Products, RoHS Capacitor, Our company has already had a lot of top factories and professional technology teams in China, offering the best products, techniques and services to worldwide customers. Honesty is our principle, professional operation is our work, service is our goal, and customers’ satisfaction is our future!
Specifications
Items | Characteristics | ||
CategoryTemperature Range | -55 ~ +125℃ | ||
Rated Voltage Range | 16 ~ 50 V | ||
Capacitance tolerance | ±20%(M) (at 20℃,120Hz) | ||
Leakage Current | After 2 minutes applied for rated voltage at 20℃, less than or equal to the specified value. | ||
Dissipation Factor | Less than or equal to the specified | (at 20℃,120Hz) | |
Low TemperatureCharacteristics(Max.Impedance Ratio) | Z(-55℃)/Z(+20℃) | ≤0.75 to 1.5 | (100KHz) |
Z(+125℃)/Z(+20℃) | ≤0.75 to 2.0 | ||
Endurance | The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 2,000 to 4,000 hours at 105℃. ΦD=Φ6.3=5,000hrs, ΦD≧Φ8=10,000hrs; | ||
Appearance | No significant damage | ||
Capacitance change | ≦±30% of the initial value | ||
D.F.(tanδ) | ≦200% of the specified value | ||
ESR | ≦200% of the specified value | ||
Leakage current | ≦The specified value | ||
Damp Heat (Steady State) |
The specifications listed below shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 60℃, 90%~ 95% RH. | ||
Appearance | No significant damage | ||
Capacitance change | ≦±30% of the initial value | ||
D.F.(tanδ) | ≦200% of the specified value | ||
ESR | ≦200% of the specified value | ||
Leakage current | ≦The specified value | ||
Surge Voltage | Surge Voltage=Rated voltage * 1.15(V)The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltages specified at 15~35℃ for 30 seconds through aprotective resistor (R=1kΩ) and discharge for 5 minutes 30seconds | ||
Appearance | No significant damage | ||
Capacitance change | ≦±30% of the initial value | ||
D.F.(tanδ) | ≦200% of the specified value | ||
ESR | ≦200% of the specified value | ||
Leakage current | ≦The specified value |
Dimensions (mm)
Coated Case |
6.3*7.2 |
8*9.5 |
10*9.5 |
10*11.5 |
ΦD |
6.3 |
8 |
10 |
10 |
L |
L+1.5Max |
|||
Φd |
0.5 |
0.5 |
0.6 |
0.6 |
p |
2.5 |
3.5 |
5.0 |
5.0 |
Standard Ratings
Rated voltage (V) |
Rated capacitance(uF) |
Case size ΦD*L(mm) |
Leakage current (uA) |
ESR(mΩ) at 20℃,100 KHz |
Rated ripple current (mArms/125℃/100kHz) |
tanδ(120Hz) |
16 |
120 |
6.3*7.2 |
19.2 |
40 |
1100 |
0.16 |
270 |
8*9.5 |
43.2 |
26 |
1500 |
0.16 |
|
470 |
10*9.5 |
75.2 |
21 |
2000 |
0.16 |
|
560 |
10*11.5 |
89.6 |
15 |
2300 |
0.16 |
|
25 |
68 |
6.3*7.2 |
17 |
45 |
1000 |
0.16 |
150 |
8*9.5 |
37.5 |
27 |
1300 |
0.16 |
|
270 |
10*9.5 |
67.5 |
22 |
1500 |
0.16 |
|
330 |
10*11.5 |
82.5 |
16 |
1700 |
0.16 |
|
35 |
47 |
6.3*7.2 |
16.45 |
60 |
900 |
0.16 |
100 |
8*9.5 |
35 |
30 |
1200 |
0.16 |
|
150 |
10*9.5 |
52.5 |
23 |
1400 |
0.16 |
|
220 |
10*11.5 |
77 |
17 |
1600 |
0.16 |
|
40 |
27 |
6.3*7.2 |
10.8 |
70 |
900 |
0.16 |
56 |
8*9.5 |
22.4 |
32 |
1200 |
0.16 |
|
100 |
10*9.5 |
40 |
24 |
1400 |
0.16 |
|
120 |
10*11.5 |
48 |
18 |
1600 |
0.16 |
|
50 |
15 |
6.3*7.2 |
10 |
80 |
800 |
0.16 |
33 |
8*9.5 |
16.5 |
35 |
1100 |
0.16 |
|
56 |
10*9.5 |
28 |
25 |
1300 |
0.16 |
|
82 |
10*11.5 |
41 |
19 |
1500 |
0.16 |
Rated Ripple Current Coefficient
Frequency (Hz) | 120Hz≤f<1kHz | 1kHz≤f<10kHz | 10kHz≤f<100kHz | 100kHz≤f<500kHz |
4.7<C≦33 | 0.05 | 0.32 | 0.67 | 1.00 |
C>33 | 0.10 | 0.35 | 0.70 | 1.00 |
Our company since its inception, constantly regards product or service high quality as business life, continually improve creation technology, make improvements to product high-quality and consistently strengthen business total high-quality management, in strict accordance together with the national standard ISO 9001:2000 for Hot Sale for China Custom RoHS SMD Mlcc Electrolytic Ceramic Capacitor Hot Products, Winning customers’ trust is definitely the gold key to our good results! If you are fascinated in our products, make sure you sense absolutely free to go to our web site or make contact with us.
Hot Sale for China Ceramic Capacitor Hot Products, RoHS Capacitor, Our company has already had a lot of top factories and professional technology teams in China, offering the best products, techniques and services to worldwide customers. Honesty is our principle, professional operation is our work, service is our goal, and customers’ satisfaction is our future!