New Fashion Design for IOT ultra capacitor - Conductive Polymer SMD Hybrid Solid Capacitor TA-Series – Holy
New Fashion Design for IOT ultra capacitor - Conductive Polymer SMD Hybrid Solid Capacitor TA-Series – Holy Detail:
Specifications
Items | Characteristics | ||
CategoryTemperature Range | -55 ~ +105℃ | ||
Rated Voltage Range | 16 ~ 125 V | ||
Capacitance tolerance | ±20%(M) (at 20℃,120Hz) | ||
Leakage Current | After 2 minutes applied for rated voltage at 20℃, less than or equal to the specified value. | ||
Dissipation Factor | Less than or equal to the specified | (at 20℃,120Hz) | |
Low TemperatureCharacteristics(Max.Impedance Ratio) | Z(-55℃)/Z(+20℃) | ≤0.75 to 1.5 | (100KHz) |
Z(+105℃)/Z(+20℃) | ≤0.75 to 2.0 | ||
Endurance | The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 5,000 to 10,000 hours at 105℃. ΦD=Φ6.3=5,000hrs, ΦD≧Φ8=10,000hrs; | ||
Appearance | No significant damage | ||
Capacitance change | ≦±30% of the initial value | ||
D.F.(tanδ) | ≦200% of the specified value | ||
ESR | ≦200% of the specified value | ||
Leakage current | ≦The specified value | ||
Damp Heat (Steady State) |
The specifications listed below shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 60℃, 90%~ 95% RH. | ||
Appearance | No significant damage | ||
Capacitance change | ≦±30% of the initial value | ||
D.F.(tanδ) | ≦200% of the specified value | ||
ESR | ≦200% of the specified value | ||
Leakage current | ≦The specified value | ||
Surge Voltage | Surge Voltage=Rated voltage * 1.15(V)The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltages specified at 15~35℃ for 30 seconds through aprotective resistor (R=1kΩ) and discharge for 5 minutes 30seconds | ||
Appearance | No significant damage | ||
Capacitance change | ≦±30% of the initial value | ||
D.F.(tanδ) | ≦200% of the specified value | ||
ESR | ≦200% of the specified value | ||
Leakage current | ≦The specified value |
Dimensions (mm)
Size |
ΦD |
L |
W |
H |
C |
R |
P |
V max |
6.3*7.7 |
6.3 |
7.7 |
6.6 |
6.6 |
7.3 |
0.5~0.8 |
2.1 |
0.3 |
8*10.5 |
8 |
10.5 |
8.3 |
8.3 |
9 |
0.7~1.1 |
3.2 |
0.3 |
10*10.5 |
10 |
10.5 |
10.3 |
10.3 |
11 |
0.7~1.3 |
4.6 |
0.3 |
10*12.5 |
10 |
12.5 |
10.3 |
10.3 |
11 |
0.7~1.3 |
4.6 |
0.3 |
Standard Ratings
Rated voltage (V) |
Rated capacitance(uF) |
Case size ΦD*L(mm) |
Leakage carrent (uA) |
ESR(mΩ) at 20℃,100 KHz |
Rated ripple current (mArms/105℃/100kHz) |
tanδ(120Hz) |
16 |
120 |
6.3*7.7 |
19.2 |
40 |
1500 |
0.16 |
270 |
8*10.5 |
43.2 |
26 |
2000 |
0.16 |
|
470 |
10*10.5 |
75.2 |
21 |
2600 |
0.16 |
|
560 |
10*12.5 |
89.6 |
15 |
3000 |
0.16 |
|
25 |
68 |
6.3*7.7 |
17 |
45 |
1400 |
0.16 |
150 |
8*10.5 |
37.5 |
27 |
1900 |
0.16 |
|
270 |
10*10.5 |
67.5 |
22 |
2500 |
0.16 |
|
330 |
10*12.5 |
82.5 |
16 |
2900 |
0.16 |
|
35 |
47 |
6.3*7.7 |
16.45 |
60 |
1300 |
0.16 |
100 |
8*10.5 |
35 |
30 |
1800 |
0.16 |
|
150 |
10*10.5 |
52.5 |
23 |
2400 |
0.16 |
|
220 |
10*12.5 |
77 |
17 |
2800 |
0.16 |
|
40 |
27 |
6.3*7.7 |
10.8 |
70 |
1200 |
0.16 |
56 |
8*10.5 |
22.4 |
32 |
1700 |
0.16 |
|
100 |
10*10.5 |
40 |
24 |
2400 |
0.16 |
|
120 |
10*12.5 |
48 |
18 |
2700 |
0.16 |
|
50 |
15 |
6.3*7.7 |
10 |
80 |
1200 |
0.16 |
33 |
8*10.5 |
16.5 |
35 |
1600 |
0.16 |
|
56 |
10*10.5 |
28 |
25 |
2300 |
0.16 |
|
82 |
10*12.5 |
41 |
19 |
2600 |
0.16 |
|
63 |
10 |
6.3*7.7 |
10 |
100 |
1000 |
0.16 |
22 |
8*10.5 |
13.86 |
40 |
1500 |
0.16 |
|
33 |
8*10.5 |
20.79 |
40 |
1500 |
0.16 |
|
33 |
10*10.5 |
20.79 |
30 |
2100 |
0.16 |
|
47 |
10*10.5 |
29.61 |
30 |
2100 |
0.16 |
|
56 |
10*12.5 |
35.28 |
22 |
2400 |
0.16 |
|
80 |
12 |
10*10.5 |
10 |
70 |
1600 |
0.16 |
15 |
10*10.5 |
12 |
70 |
1600 |
0.16 |
|
18 |
10*12.5 |
14.4 |
50 |
1800 |
0.16 |
|
100 |
10 |
10*10.5 |
10 |
80 |
1400 |
0.16 |
12 |
10*10.5 |
12 |
80 |
1400 |
0.16 |
|
15 |
10*12.5 |
15 |
60 |
1600 |
0.16 |
|
125 |
10 |
10*10.5 |
12.5 |
90 |
1200 |
0.16 |
Rated Ripple Current Coefficient
Frequency (Hz) | 120Hz≤f<1kHz | 1kHz≤f<10kHz | 10kHz≤f<100kHz | 100kHz≤f<500kHz |
4.7<C≦33 | 0.05 | 0.32 | 0.67 | 1.00 |
C>33 | 0.10 | 0.35 | 0.70 | 1.00 |
Product detail pictures:

Related Product Guide:
To be able to ideal satisfy client's requirements, all of our operations are strictly performed in line with our motto "High High-quality, Competitive Price tag, Fast Service" for New Fashion Design for IOT ultra capacitor - Conductive Polymer SMD Hybrid Solid Capacitor TA-Series – Holy , The product will supply to all over the world, such as: Ottawa, Plymouth, Milan, Based on our guiding principle of quality is the key to development, we continually strive to exceed our customers' expectations. As such, we sincerely invite all interested companies to contact us for future cooperation, We welcome old and new customers to hold hands together for exploring and developing; For more information, please feel free to contact us. Thanks. Advanced equipment, strict quality control, customer-orientation service, initiative summary and improvement of defects and extensive industry experience enable us to guarantee more customer satisfaction and reputation which, in return, brings us more orders and benefits. If you are interested in any of our products, please feel free to contact us. Inquiry or visit to our company are warmly welcome. We sincerely hope to start a win-win and friendly partnership with you. You can see more details in our website.

The sales manager is very patient, we communicated about three days before we decided to cooperate, finally, we are very satisfied with this cooperation!
