Special Design for China Ymin Vkl (R) Aluminum Electrolytic SMD Capacitor
We always think and practice corresponding to the change of circumstance, and grow up. We goal at the achievement of a richer mind and body and also the living for Special Design for China Ymin Vkl (R) Aluminum Electrolytic SMD Capacitor, The principle of our company is always to offer high-quality solutions, experienced company, and trustworthy communication. Welcome all close friends to place trial buy for creating a long-term business romance.
We always think and practice corresponding to the change of circumstance, and grow up. We goal at the achievement of a richer mind and body and also the living for China Capacitors, Type Super Capacitors, Facing fierce global market competition, we have launched the brand building strategy and updated the spirit of “human-oriented and faithful service”, with an aim to gain global recognition and sustainable development.
◆ Specifications
| Items | Characteristics | ||
| CategoryTemperature Range | -55 ~ +105℃ | ||
| Rated Voltage Range | 2.5 ~ 25V | ||
| Capacitance tolerance | ±20%(M) (at 20℃,120Hz) | ||
| Leakage Current | After 2 minutes applied for rated voltage at 20℃, less than or equal to the specified value. | ||
| Dissipation Factor | Rated voltage (V) | 2.5～25 | (at 20℃,120Hz) |
| tanδ (Max.) | 0.12 | ||
| Low TemperatureCharacteristics(Max.Impedance Ratio) | Z(-25℃)/Z(+20℃) | ≤1.25 | (100KHz) |
| Z(-55℃)/Z(+20℃) | ≤1.25 | ||
| Endurance | The specifications listed below shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 3000 hours at 105℃. | ||
| Appearance | No significant damage | ||
| Capacitance change | ≦±20% of the initial value | ||
| D.F.(tanδ) | ≦150% of the specified value | ||
| ESR | ≦150% of the specified value | ||
| Leakage current | ≦The specified value | ||
| Damp Heat(Steady State) | The specifications listed below shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 60℃, 90%～ 95% RH. | ||
| Appearance | No significant damage | ||
| Capacitance change | ≦±20% of the initial value | ||
| D.F.(tanδ) | ≦150% of the specified value | ||
| ESR | ≦150% of the specified value | ||
| Leakage current | ≦The specified value | ||
| Surge Voltage | Surge Voltage=Rated voltage * 1.15(V)The capacitors shall be subjected to 1000 cycles each consisting of charge with the surge voltages specified at 105℃ for 30 seconds through a protective resistor (Rc=1kΩ) and discharge for 5 minutes 30 seconds | ||
| Appearance | No significant damage | ||
| Capacitance change | ≦±20% of the initial value | ||
| D.F.(tanδ) | ≦150% of the specified value | ||
| ESR | ≦150% of the specified value | ||
| Leakage current | ≦The specified value | ||
◆ Dimensions (mm)
|
ΦD |
5 |
6.3 |
8 |
10 |
|
P |
2 |
2.5 |
3.5 |
5 |
|
Φd |
0.5 |
0.5 |
0.6 |
0.6 |
|
ɑ |
L<16mm：1.0 |
|||
|
L≧16mm：2.0 |
||||
◆ Standard Ratings
|
Rated voltage (V) |
Rated capacitance(uF) |
Case size ΦD*L(mm) |
ESR(mΩ) at 20℃,100 KHz | Rated ripple current (mArms/105℃/100kHz) |
|
2.5 |
680 |
8*12 |
10 |
5330 |
|
820 |
8*12 |
10 |
5330 |
|
|
1500 |
10*12 |
10 |
5600 |
|
|
4 |
560 |
8*12 |
10 |
5330 |
|
1200 |
10*12 |
10 |
5600 |
|
|
6.3 |
820 |
6.3*11 |
16 |
3500 |
|
680 |
8*12 |
12 |
4820 |
|
|
1000 |
8*12 |
12 |
4820 |
|
|
820 |
10*12 |
10 |
5600 |
|
|
1000 |
10*12 |
10 |
5400 |
|
|
1500 |
10*12 |
10 |
5600 |
|
|
10 |
330 |
6.3*11 |
16 |
2000 |
|
560 |
8*12 |
12 |
4500 |
|
|
1000 |
8*12 |
12 |
4500 |
|
|
820 |
10*12 |
12 |
6100 |
|
|
1000 |
10*12 |
12 |
6100 |
|
|
1500 |
10*12 |
12 |
6100 |
|
|
16 |
220 |
6.3*11 |
25 |
2500 |
|
330 |
8*12 |
13 |
4800 |
|
|
470 |
8*12 |
13 |
4800 |
|
|
560 |
8*12 |
13 |
4800 |
|
|
560 |
10*12 |
13 |
5250 |
|
|
1000 |
10*12 |
13 |
5250 |
|
|
20 |
100 |
8*12 |
30 |
2750 |
|
150 |
10*12 |
25 |
2900 |
|
|
25 |
82 |
5*11 |
55 |
1500 |
|
150 |
6.3*11 |
55 |
1500 |
|
|
47 |
8*12 |
24 |
2320 |
|
|
68 |
8*12 |
24 |
3320 |
|
|
270 |
8*12 |
15 |
4900 |
|
|
330 |
10*12 |
15 |
4900 |
|
|
470 |
10*12 |
15 |
4900 |
◆ Rated Ripple Current Coefficient
|
Frequency (Hz) |
120Hz≤f＜1kHz |
1kHz≤f＜10kHz |
10kHz≤f＜100kHz |
100kHz≤f＜500kHz |
| Coefficient |
0.05 |
0.30 |
0.70 |
1.00 |
We always think and practice corresponding to the change of circumstance, and grow up. We goal at the achievement of a richer mind and body and also the living for Special Design for China Ymin Vkl (R) Aluminum Electrolytic SMD Capacitor, The principle of our company is always to offer high-quality solutions, experienced company, and trustworthy communication. Welcome all close friends to place trial buy for creating a long-term business romance.
Special Design for China Capacitors, Type Super Capacitors, Facing fierce global market competition, we have launched the brand building strategy and updated the spirit of “human-oriented and faithful service”, with an aim to gain global recognition and sustainable development.
