Supply OEM Capacitors
So as to provide you with ease and enlarge our business, we even have inspectors in QC Crew and guarantee you our best company and solution for Supply OEM Capacitors, We have been ready to offer you the most beneficial strategies over the designs of your orders in a specialist way if you need. Within the meantime, we preserve on establishing new technologies and creating new designs so as to help make you ahead within the line of this business.
So as to provide you with ease and enlarge our business, we even have inspectors in QC Crew and guarantee you our best company and solution for Radial Aluminum Electrolytic Capacitors CD294, Now we have gained a lot of recognition among customers spread all across the world. They trust us and always give repetitive orders. Furthermore, mentioned below are some of the major factors that have played significant role in our tremendous growth in this domain.
◆ Specifications
Items | Characteristics | ||
CategoryTemperature Range | -55 ~ +105℃ | ||
Rated Voltage Range | 2.5 ~ 25V | ||
Capacitance tolerance | ±20%(M) (at 20℃,120Hz) | ||
Leakage Current | After 2 minutes applied for rated voltage at 20℃, less than or equal to the specified value. | ||
Dissipation Factor | Rated voltage (V) | 2.5~25 | (at 20℃,120Hz) |
tanδ (Max.) | 0.12 | ||
Low TemperatureCharacteristics(Max.Impedance Ratio) | Z(-25℃)/Z(+20℃) | ≤1.25 | (100KHz) |
Z(-55℃)/Z(+20℃) | ≤1.25 | ||
Endurance | The specifications listed below shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 3000 hours at 105℃. | ||
Appearance | No significant damage | ||
Capacitance change | ≦±20% of the initial value | ||
D.F.(tanδ) | ≦150% of the specified value | ||
ESR | ≦150% of the specified value | ||
Leakage current | ≦The specified value | ||
Damp Heat(Steady State) | The specifications listed below shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 60℃, 90%~ 95% RH. | ||
Appearance | No significant damage | ||
Capacitance change | ≦±20% of the initial value | ||
D.F.(tanδ) | ≦150% of the specified value | ||
ESR | ≦150% of the specified value | ||
Leakage current | ≦The specified value | ||
Surge Voltage | Surge Voltage=Rated voltage * 1.15(V)The capacitors shall be subjected to 1000 cycles each consisting of charge with the surge voltages specified at 105℃ for 30 seconds through a protective resistor (Rc=1kΩ) and discharge for 5 minutes 30 seconds | ||
Appearance | No significant damage | ||
Capacitance change | ≦±20% of the initial value | ||
D.F.(tanδ) | ≦150% of the specified value | ||
ESR | ≦150% of the specified value | ||
Leakage current | ≦The specified value |
◆ Dimensions (mm)
ΦD |
5 |
6.3 |
8 |
10 |
P |
2 |
2.5 |
3.5 |
5 |
Φd |
0.5 |
0.5 |
0.6 |
0.6 |
ɑ |
L<16mm:1.0 |
|||
L≧16mm:2.0 |
◆ Standard Ratings
Rated voltage (V) |
Rated capacitance(uF) |
Case size ΦD*L(mm) |
ESR(mΩ) at 20℃,100 KHz | Rated ripple current (mArms/105℃/100kHz) |
2.5 |
680 |
8*12 |
10 |
5330 |
820 |
8*12 |
10 |
5330 |
|
1500 |
10*12 |
10 |
5600 |
|
4 |
560 |
8*12 |
10 |
5330 |
1200 |
10*12 |
10 |
5600 |
|
6.3 |
820 |
6.3*11 |
16 |
3500 |
680 |
8*12 |
12 |
4820 |
|
1000 |
8*12 |
12 |
4820 |
|
820 |
10*12 |
10 |
5600 |
|
1000 |
10*12 |
10 |
5400 |
|
1500 |
10*12 |
10 |
5600 |
|
10 |
330 |
6.3*11 |
16 |
2000 |
560 |
8*12 |
12 |
4500 |
|
1000 |
8*12 |
12 |
4500 |
|
820 |
10*12 |
12 |
6100 |
|
1000 |
10*12 |
12 |
6100 |
|
1500 |
10*12 |
12 |
6100 |
|
16 |
220 |
6.3*11 |
25 |
2500 |
330 |
8*12 |
13 |
4800 |
|
470 |
8*12 |
13 |
4800 |
|
560 |
8*12 |
13 |
4800 |
|
560 |
10*12 |
13 |
5250 |
|
1000 |
10*12 |
13 |
5250 |
|
20 |
100 |
8*12 |
30 |
2750 |
150 |
10*12 |
25 |
2900 |
|
25 |
82 |
5*11 |
55 |
1500 |
150 |
6.3*11 |
55 |
1500 |
|
47 |
8*12 |
24 |
2320 |
|
68 |
8*12 |
24 |
3320 |
|
270 |
8*12 |
15 |
4900 |
|
330 |
10*12 |
15 |
4900 |
|
470 |
10*12 |
15 |
4900 |
◆ Rated Ripple Current Coefficient
Frequency (Hz) |
120Hz≤f<1kHz |
1kHz≤f<10kHz |
10kHz≤f<100kHz |
100kHz≤f<500kHz |
Coefficient |
0.05 |
0.30 |
0.70 |
1.00 |
So as to provide you with ease and enlarge our business, we even have inspectors in QC Crew and guarantee you our best company and solution for Supply OEM Capacitors, We have been ready to offer you the most beneficial strategies over the designs of your orders in a specialist way if you need. Within the meantime, we preserve on establishing new technologies and creating new designs so as to help make you ahead within the line of this business.
Supply OEM Radial Aluminum Electrolytic Capacitors CD294, Now we have gained a lot of recognition among customers spread all across the world. They trust us and always give repetitive orders. Furthermore, mentioned below are some of the major factors that have played significant role in our tremendous growth in this domain.